Spinal fractures are extremely painful and usually happen when an external force applied to the spine exceeds the vertebral column s ability to bear the load. Many times, the bone fragments pinch and damage the spinal cord, which leads to an injury or dislocation of the bony vertebra. Although spinal fractures can develop anywhere along the spine, the most common site is the lower back.

What causes spinal fractures?

Spinal fractures can occur due to both minor trauma/falls and major accidents. The following are the probable causes of such fractures-

  Injuries sustained while playing a sport
  A traumatic injury
  Spinal instability
  Injuries sustained after falling from a height
  A whiplash
  Injuries sustained in an accident
  An underlying condition such as Osteoporosis, which causes the spinal bones to weaken

Symptoms observed:

Spinal fractures are characterized by the following symptoms-

  Muscle spasm and swelling
  Numbness
  Acute pain that worsens when you walk or stand for a long time
  A tingling sensation
  Restricted mobility of the spinal column
  Spinal deformity/disability
  Sudden onset of pain in the lower back region

What are the various types of spinal fractures?

Spinal fractures primarily fall into four categories, namely the following-

  Compression - Compression fractures are quite common in people with osteoporosis or bone cancer. The bones become fragile and brittle. If sudden force is applied with extreme pressure, the vertebra may not be able to support the load and that may result in a fracture.

  Burst - Severe trauma, such as a car accident can cause burst fractures. The external pressure is so much that the vertebra gets crushed. As a result, the bony fragments spread out and cause spinal cord injury. Unlike a compression fracture, where only a part of the vertebra is damaged, a burst fracture leads to multiple fractures in the vertebra.

  Flexion-distraction - This type of fracture is likely to happen if you are involved in a car accident. Normally, the spine is made to flex forward. However, a sudden jerk that pushes your body forward can put a lot of pressure on the spine and cause the vertebrae to break.

  Fracture-dislocation - This debilitating condition results from a torn ligament and broken bone.

What is the treatment for spinal fractures?

Treatment options for spinal fractures include both non-surgical and surgical methods.

  Non-surgical treatment - Most cases of spinal fractures can be treated with immobilization in a corset or brace for up to 10-12 weeks. Bracing will help prevent deformity and reduce pain.

  Surgical treatment - The doctor may recommend surgery in severe cases. The two standard surgical procedures are-

Vertebroplasty - The surgeon will insert a tube, known as a catheter, into the compressed vertebra. Through the catheter, he/she will inject bone cement into the fracture site. This will harden and stabilize the vertebral column. Vertebroplasty has proved to be an effective procedure to reduce pain. The surgery restores mobility and prevents loss of bone due to bed rest.

Kyphoplasty - During this procedure, the surgeon inserts a catheter into the spinal column under the guidance of an X-ray. Next, he/she makes small incisions along the back and inserts an inflatable bone stamp. The tamp, once inflated, bring back the vertebral body to its original height. It also creates a cavity to be filled with bone cement, which seals the cracks. The bone cement stops the vertebra from collapsing again. After the whole procedure, the surgeon will remove the catheter and stitch the incisions.

Following surgery, you will need to wear a brace for about 6-12 weeks. Physical therapy is strongly recommended initially to help you get back to your daily activities in a week or two.

Spinal Fractures - All You Should Know!

A bone fracture is often abbreviated as FX or # and is a painful medical condition that causes damage in the continuity of the bone. A dictionary meaning of fracture is a separation of an object or a material into two or more pieces under the action of stress.


A bone fracture could be due to a high force impact or stress, an injury from trauma or sports or even certain medical conditions that weaken the bones, such as osteoporosis, bone cancer or osteogenesis imperfecta.


However, a significant number of fractures occur due to high force impact or stress. A fracture could be simple where the skin is not exposed or compound where skin gets exposed. A fracture could be complete where the bone breaks up in two pieces or could be incomplete with a crack in the bone.


Treatment of bone fracture depends on the type of fracture. In a large number of cases, the bone is aligned through a cast or splint. However, a very crucial part in the recovery of the treatment is physiotherapy. Physiotherapy is a comprehensive care plan designed for the patient for optimal and complete recovery. Yet most patients do not understand its effectiveness. In layman's terms physiotherapy is understood as few exercises or messages designed to aid the patient's treatment. However, Physiotherapy not only aids the recovery, it effectively promotes healing, reduces pain and stiffness and gradually helps the patient to return back to his/her normal daily activities of life.


Physiotherapy is a complete preventive and rehabilitative approach to treatment and must begin as early as possible and continue post fracture. Physiotherapy has been proven to be effective in preventing post fracture stiffness and weakness that occurs in adjacent joints and muscles generally during the first six weeks of the healing process. If the X-ray shows poor healing, physiotherapy is a medium used to help the patient regain muscle strength and speed up recovery.


Irregular movements can lead the bones to further damage the surrounding tissues and muscles. Damage may also lead to infection, especially in compound fractures where the skin is exposed. Thus, physiotherapy regulates the movements, supports healing and prevents further damage. Physiotherapy not only involves messages or exercises. It includes a range of interventions designed for prevention and rehabilitation of patients. These interventions include pain management, education and awareness on safety and prevention of injury, strength building and flexibility exercises and in some cases taping, bracing and electrotherapy.


To add to its benefits, physiotherapy procedures are also completely safe and are supported by medical science. These procedures also do not have any side effects. Always remember to consult your orthopedic doctor as he can guide you towards the best physiotherapy treatment.


Stay fit and healthy!"

Physiotherapy - Why it is Critical for Recovery from Fracture?

Spine surgery is conventionally performed as  open surgery , which means the region being worked on is opened with a long entry point to permit the surgeon to view and access the area. Technical and scientific advances have permitted more back and neck conditions to be treated with a less obtrusive surgical technique. The minimal invasive spine surgery (MISS) does not include a long cut, and it prevents causing damage to the muscles around the spine. As a rule, this causes less pain after the surgery and a speedier and healthy recovery.

Spine surgery is normally suggested when non-surgical treatments like medicinal or exercise based methods have not helped in lessening the excruciating symptoms of your back problem. Moreover, surgery is just considered if your doctor can pinpoint the correct reason of your pain, for example, a herniated circle or spinal stenosis. 

MISS is also called less obtrusive spine surgery. In these procedures, surgeons utilise particular instruments to get to the spine through little cuts. The surgery process is as follows:

During the surgery, a little entry point is made and the tubular retractor is embedded through the skin.
It is also inserted into the delicate tissues down to the spinal cord.
This makes a passage to the little range where the problem exists in the spine.
The tubular retractor holds the muscles open and is set up all through the surgery.
The surgeon gets to the spine utilising the little instruments that fit through the focal point of the tubular retractor.
Any bone or disk material that is expelled goes out from the retractor.
Any gadgets needed for the fusion process, for example, screws or rods, are embedded through the retractor.
A few surgeries require more than one retractor.
Keeping in mind the end goal to see where to put the entry point and embed the retractor, the surgeon is guided by fluoroscopy.
This strategy shows ongoing X-ray pictures of the patient's spine on a screen throughout the surgery.
The surgeon additionally utilises a microscope to enlarge the view through the retractor.
Towards the end of the procedure, the tubular retractor is expelled and the muscles come back to their original position.
This restrains the muscle damage that is more ordinarily found in open surgeries.
It is very important to talk about these risks with your doctor before your surgery or procedure.

Infection: Antibiotics are consistently given to the patient some time before, during, and regularly after the surgery to reduce the danger of infections.
Bleeding: A specific measure of bleeding is normal; however, this is not commonly dangerous.
Pain in the grafted area: Some patients will encounter surgical pain at the bone joint site.
Recurring symptoms: A few patients may encounter a repeat of their side effects.
Pseudarthrosis: Patients who tend to smoke are more prone to pseudarthrosis. This is a condition wherein there is insufficient bone formation. In case that this happens, a minor surgery may be required.
Nerve damage: It is possible that the nerves or veins might be harmed during these operations. These complications are extremely uncommon.
Blood clots: Another complication is blood clots in the legs. This poses a threat because these clots can break off and settle in the lungs.

Minimally Invasive Spine Surgery - A Guide On What To Expect?

A broken wrist is known as a wrist fracture and it may occur due to a variety of causes starting from undue pressure on the wrist which can result in an injury as well as debilitating conditions like arthritis, which makes the bones and joints prone to fractures. There are also non displaced breaks, which are stable kinds of fractures and in which, the wrist remains in its place. Let us find out more about the kinds of fractures and the procedures for treatment of the same.

Type of Fracture: The wrist is basically made up of eight small bones that connect the two long arm bones, which are known as the radius and ulna and create the forearm. The broken wrist can take place in any of these bones. A hand surgeon will generally take a look at this kind of fracture and determine whether it is displaced, stable or open. As discussed earlier, a wrist fracture can be of various types. While a non displaced wrist fracture is a more stable kind that does not really require much more than rest or medication, a displaced wrist fracture is a non stable kind where dislocation happens.

Other Factors: There are a variety of other factors that will be taken into consideration in order to repair this kind of a fracture. To begin with, the Orthopaedic specialist will consider your age and the kind of job, hobbies and other kinds of activities that you indulge in. Also, the doctor will try to ascertain whether or not you are in good health on an overall basis. The presence of other injuries will also be taken into account for this kind of an injury in there has been a bike or car accident that has caused the fracture.

Treatment: The method of treatment will vary as per the considerations listed above. A padded splint may be installed in order to align and support the bones and wrist respectively, so that there is ample relief from the acute pain as well. Further, an unstable fracture will require a cast as to support the entire forearm and give proper rest to the region so that the bone can grow back together and get aligned again. Surgery may also be required for very severe cases, and pins, screws, metals and plates may also be used depending on the exact location and type of fracture.

Recovery: Remember to move your fingers as much as you can so as to prevent them from getting stiff while they are held up in a splint or a cast.
Hand therapy will be helpful in gaining back motion and function of the wrist.

Wrist Fracture Procedure - Facts You Should Know About 

Even though we have 206 bones in our bodies, breaking just one is enough to bring our daily lives to a standstill. A partial or complete break in a bone is termed as a fracture. While minor fractures can heal in as little as 6 weeks major fractures can take 3-4 months to heal properly. In cases of complex fractures, you may need physical therapy even after this time period to get back complete mobility. Hence patience is essential when a fracture is healing, but here are a few tips on how to speed up the process.

Increase your protein intake: Proteins are essential for the healing and repairing of damage to bones and tissues. Proteins also give the bone structure its strength, Hence, depriving the body of adequate protein will result in the formation of soft bones rather than hard, strong bones. This prevents a bone from fracturing in the same place again.
Have a diet rich in antioxidants: Inflammation is one of the first symptoms of a fracture. This inflammation can continue for many days after the incident and until the inflammation reduces, healing cannot take place properly. Antioxidants help rid toxins from the body and help reduce inflammation thereby initiating the healing process. Antioxidants can also help relieve pain.
Exercise: While you must take care not to apply too much pressure on the affected area it is essential to move the limb as much as possible. Being active promotes blood flow and in this way speeds up the healing process.
Avoid alcohol and caffeine: In most cases, a doctor will prescribe pain relievers to deal with the pain of a fracture. Under no circumstances should you consume alcohol when taking these medications. Even after the antibiotic course is over it is a good idea to abstain from alcohol as this can increase inflammation. Similarly, caffeine and all caffeinated products should also be avoided as they contain compounds that can prevent calcium from being absorbed.
Have an alkaline diet: Having an alkaline diet with lots of fruits and vegetables helps stabilise the pH levels of the body and conserves minerals and proteins needed to build strong bones. In this way, it creates the optimal environment for healing. An alkaline diet also increases the production of growth hormones and other growth factors like IGF insulin in the body. These are crucial to speeding up the healing process and aid in new bone formation.

5 Ways For Quick Recovery From Fracture

Endoscopy refers to inserting microscopic cameras into the body through tiny incisions which throw up pictures of the inside of the body onto a screen. Endoscopy has been used for diagnostic purposes since the 1970s. Endoscopy for surgery has become popular from the 1990s.

Endoscopic spine surgery is a state-of-the-art surgery technique which involves micro incisions and minute tubes that cause almost no damage to surrounding tissues and muscles. It is a minimally invasive surgery and it is also called a pinhole surgery.

What are the advantages of endoscopic pinhole spine surgery?

There are a lot of reasons why doctors opt for an endoscopic surgery-

  It is also called Minimally Invasive Spine Surgery (MISS) because it causes little blood loss
  Recovery is almost immediate. A person can resume everyday activities within a week
  Very little pain around the surgery region so minimum pain medication is needed.
  No muscle or bone is removed.
  Since screws and rods are not used, full mobility of the spine can be restored
  The wounds are minute and do not usually require stitches and thus no ugly scars are left after the wounds heal.

What are the characteristics of an endoscopic spine surgery?

  The surgery is performed under local anaesthesia
  The person is discharged within 24 hours of the surgery
  The incisions that are made are microscopic

What are the different types of endoscopic surgery?

Endoscopic discectomy:
It is the least invasive of all spinal surgeries. It is used for treating herniated discs. Endoscopy reveals images of the spine. Through the same tunnel, surgery tools are inserted and the bulging or herniated disc is pulled out with a grasper. The wound does not always require stitches to close it.

Endoscopic Laminotomy:
This a substitute for open laminotomy. The camera helps locate exactly where the target area is. Then an incision is made below and above the lamina to relieve the pressure compressing the nerve.

Endoscopic facet rhizotomy:
With microscopic cameras, the nerves causing pain are identified and then the laser is used to numb these nerves which relieve pain. This type of surgery can also remedy a previously botched spinal surgery, facet joint arthritis or facet joint pain

Endoscopic foraminotomy:
This type of surgery again uses microscopic surgical tools guided by a tiny camera to enlarge a narrowed neuro of spinal nerve root canal to give it more room to move about without being compressed.

Endoscopic Spine Surgery & Pinhole Technique!

Don't wait any longer, manage your Column Traumatology online with a Lybrate doctor today

Consult for Column Traumatology - Online and Easy!

FilterClear All

COMMON SPECIALITIES

COMMON ISSUES