Spinal fractures are extremely painful and usually happen when an external force applied to the spine exceeds the vertebral column s ability to bear the load. Many times, the bone fragments pinch and damage the spinal cord, which leads to an injury or dislocation of the bony vertebra. Although spinal fractures can develop anywhere along the spine, the most common site is the lower back.

What causes spinal fractures?

Spinal fractures can occur due to both minor trauma/falls and major accidents. The following are the probable causes of such fractures-

  Injuries sustained while playing a sport
  A traumatic injury
  Spinal instability
  Injuries sustained after falling from a height
  A whiplash
  Injuries sustained in an accident
  An underlying condition such as Osteoporosis, which causes the spinal bones to weaken

Symptoms observed:

Spinal fractures are characterized by the following symptoms-

  Muscle spasm and swelling
  Numbness
  Acute pain that worsens when you walk or stand for a long time
  A tingling sensation
  Restricted mobility of the spinal column
  Spinal deformity/disability
  Sudden onset of pain in the lower back region

What are the various types of spinal fractures?

Spinal fractures primarily fall into four categories, namely the following-

  Compression - Compression fractures are quite common in people with osteoporosis or bone cancer. The bones become fragile and brittle. If sudden force is applied with extreme pressure, the vertebra may not be able to support the load and that may result in a fracture.

  Burst - Severe trauma, such as a car accident can cause burst fractures. The external pressure is so much that the vertebra gets crushed. As a result, the bony fragments spread out and cause spinal cord injury. Unlike a compression fracture, where only a part of the vertebra is damaged, a burst fracture leads to multiple fractures in the vertebra.

  Flexion-distraction - This type of fracture is likely to happen if you are involved in a car accident. Normally, the spine is made to flex forward. However, a sudden jerk that pushes your body forward can put a lot of pressure on the spine and cause the vertebrae to break.

  Fracture-dislocation - This debilitating condition results from a torn ligament and broken bone.

What is the treatment for spinal fractures?

Treatment options for spinal fractures include both non-surgical and surgical methods.

  Non-surgical treatment - Most cases of spinal fractures can be treated with immobilization in a corset or brace for up to 10-12 weeks. Bracing will help prevent deformity and reduce pain.

  Surgical treatment - The doctor may recommend surgery in severe cases. The two standard surgical procedures are-

Vertebroplasty - The surgeon will insert a tube, known as a catheter, into the compressed vertebra. Through the catheter, he/she will inject bone cement into the fracture site. This will harden and stabilize the vertebral column. Vertebroplasty has proved to be an effective procedure to reduce pain. The surgery restores mobility and prevents loss of bone due to bed rest.

Kyphoplasty - During this procedure, the surgeon inserts a catheter into the spinal column under the guidance of an X-ray. Next, he/she makes small incisions along the back and inserts an inflatable bone stamp. The tamp, once inflated, bring back the vertebral body to its original height. It also creates a cavity to be filled with bone cement, which seals the cracks. The bone cement stops the vertebra from collapsing again. After the whole procedure, the surgeon will remove the catheter and stitch the incisions.

Following surgery, you will need to wear a brace for about 6-12 weeks. Physical therapy is strongly recommended initially to help you get back to your daily activities in a week or two.

Spinal Fractures - All You Should Know!

Breaking a bone no matter how small is painful. This pain is caused both by the actual break in the bone and the damage to surrounding muscles, ligaments, nerves and other soft tissue. There are three stages of pain caused by a fracture:

Acute Pain: Pain that occurs immediately after a bone is fractured
Sub-Acute Pain: Pain experienced while the one and soft tissues heal
Chronic Pain: Pain experienced after the fracture has healed
Any kind of fracture can cause these types of pain. However, it is not essential for everyone who has had a fracture to experience all the three kinds of pain. Many people experience pain only when the fracture occurs but in few cases, a person may break a bone and not realize it. Each type of pain needs to be dealt with in a different way.

Acute Pain: Acute pain reduces as the fracture heals. For this, the fractured bone must be reset in place and held together with a splint, brace or cast so as to immobilize it. In some cases, surgery may also be needed. Over the counter pain medication is often prescribed to help deal with this type of pain. The patient is also advised to rest the broken bone and avoid certain types of movement that could worsen the break. A broken bone takes a minimum of 6 to 8 weeks to heal. However, in cases of other conditions such as osteoporosis, this time period could be much longer.
Sub-Acute Pain: As the injury heals, the sub-acute pain experienced reduces. Immobilizing a broken bone to help it heal causes the muscles and soft tissues around it to stiffen and weaken thus triggering this type of pain. Physical therapy can be very helpful in dealing with this type of pain. Along with strengthening the muscles and reducing stiffness, physical therapy also helps reduce inflammation and scar tissue. Physical therapy can be provided in many ways including exercises, electrical stimulation, ultrasounds, massage etc. It is important to remember that at this stage of treatment, the more the affected limb is used, the faster it will heal. However, it is advisable to avoid putting too much pressure on the bone.
Chronic Pain: Some people may experience pain for several months and even years after a fracture has healed. This is usually caused by nerve damage or the development of scar tissue. Underlying conditions such as arthritis could also trigger this type of pain. Management of chronic pain varies from individual to individual. Treatment usually takes the form of medication, exercises and physical therapy. It is important not to avoid this type of pain and consult a doctor to ensure that it is not being caused by any other condition.

Fracture Pain - How To Deal With It?

A hand fracture is a condition characterized by broken bones of the hand. The bones in the hand include the bones that are present in the fingers and the wrists. A fracture of the hand tends to occur when you bend or twist your hand in the wrong manner. It may also be caused by injuries related to sports and falls.

Symptoms
Symptoms of swelling and pain are the most common of them all. The range of motion for the affected hand will be reduced as well. The knuckle bone may appear to have been sunken in. Most obviously, it will be difficult in carrying out regular tasks which need the hands.

Therapies
The initial treatment for a hand fracture will be focused on reducing the pain. Pain relieving medications such as ibuprofen will be administered which provides relief from the pain. The next step will be to keep the affected hand immobilized so as not to hamper the recovery process. Once stability is restored, therapeutically relevant exercises are prescribed to help normalize the regular hand movements.

The following exercises are relevant in case of a hand fracture:

Wringing a towel: This is an exercise wherein you wring a towel to improve flexibility and strength in the hand. Simply grab a towel and twist it in both directions; imagine wringing water from the towel.
Rolls of the wrist: Wrist rolls aim to increase the ROM (range of motion) in your wrists and the hands. Hold the hand steady and rotate your wrists both clockwise and anticlockwise. You can also hold a light weight in your hand to make it more challenging.
Prayer stretch: A prayer stretch is another exercise that can help boost your wrist flexibility. You start by positioning the palms together like in a prayer, then hold up the elbows while pushing the hands against each other. You should feel a stretch in your wrists and hands.
Grasping: This is a technique wherein you grasp objects to improve your grip strength. Try gripping objects such as tennis ball or stress balls to get your gripping ability up to normal levels.


4 Effective Therapies Post Hand Fracture!

Spine surgery is conventionally performed as  open surgery , which means the region being worked on is opened with a long entry point to permit the surgeon to view and access the area. Technical and scientific advances have permitted more back and neck conditions to be treated with a less obtrusive surgical technique. The minimal invasive spine surgery (MISS) does not include a long cut, and it prevents causing damage to the muscles around the spine. As a rule, this causes less pain after the surgery and a speedier and healthy recovery.

Spine surgery is normally suggested when non-surgical treatments like medicinal or exercise based methods have not helped in lessening the excruciating symptoms of your back problem. Moreover, surgery is just considered if your doctor can pinpoint the correct reason of your pain, for example, a herniated circle or spinal stenosis. 

MISS is also called less obtrusive spine surgery. In these procedures, surgeons utilise particular instruments to get to the spine through little cuts. The surgery process is as follows:

During the surgery, a little entry point is made and the tubular retractor is embedded through the skin.
It is also inserted into the delicate tissues down to the spinal cord.
This makes a passage to the little range where the problem exists in the spine.
The tubular retractor holds the muscles open and is set up all through the surgery.
The surgeon gets to the spine utilising the little instruments that fit through the focal point of the tubular retractor.
Any bone or disk material that is expelled goes out from the retractor.
Any gadgets needed for the fusion process, for example, screws or rods, are embedded through the retractor.
A few surgeries require more than one retractor.
Keeping in mind the end goal to see where to put the entry point and embed the retractor, the surgeon is guided by fluoroscopy.
This strategy shows ongoing X-ray pictures of the patient's spine on a screen throughout the surgery.
The surgeon additionally utilises a microscope to enlarge the view through the retractor.
Towards the end of the procedure, the tubular retractor is expelled and the muscles come back to their original position.
This restrains the muscle damage that is more ordinarily found in open surgeries.
It is very important to talk about these risks with your doctor before your surgery or procedure.

Infection: Antibiotics are consistently given to the patient some time before, during, and regularly after the surgery to reduce the danger of infections.
Bleeding: A specific measure of bleeding is normal; however, this is not commonly dangerous.
Pain in the grafted area: Some patients will encounter surgical pain at the bone joint site.
Recurring symptoms: A few patients may encounter a repeat of their side effects.
Pseudarthrosis: Patients who tend to smoke are more prone to pseudarthrosis. This is a condition wherein there is insufficient bone formation. In case that this happens, a minor surgery may be required.
Nerve damage: It is possible that the nerves or veins might be harmed during these operations. These complications are extremely uncommon.
Blood clots: Another complication is blood clots in the legs. This poses a threat because these clots can break off and settle in the lungs.

Minimally Invasive Spine Surgery - A Guide On What To Expect?

Fractures are simply a break in a bone. They can be caused due to injury, (traumatic fractures) or a pre-existing condition like osteoporosis that causes weakening of bones (pathologic fractures). There are many ways to classify fractures. All fractures fall into the major categories of simple and compound fractures. Simple fractures are fractures where bones remain inside the skin and don t jut out. They are also called closed fractures.

Compound fractures, also called open fractures, are broken bones that penetrate through the skin. These types expose the bone and deep tissues to the environment. Compound fractures are more serious of the two. The healing here may be affected due to deep infections for which antibiotics need to be used. There are many different sub types of fractures and we re only going to skim through them here.

Comminuted fractures: Severe fractures in which a bone breaks into several smaller pieces.
Avulsion fractures: A small piece of bone is completely torn off from the main bone due to fierce pulling off a part of the body.
Other types of fractures are characterised by the many different angles the bone breaks into like transverse, oblique and spiral fractures.

Diagnosis
When a bone is broken there are symptoms like swelling that doesn t subside on its own and pain. In such a case it s imperative that one goes to a doctor for a diagnosis. Doctors can usually recognise most fractures by examining the injury and taking an X-ray. The X-ray also provides a clear idea about the type of fracture and the degree of displacement of the bone. And, it s important that the patient doesn t wait too long before approaching a doctor. This is because bones begin to heal very quickly after a fracture and the bone tissue will heal using any tissue available. This can lead to a misalignment of broken pieces of bone and cause disability and loss of function.

There are cases when X-ray may not show a fracture. This is especially common in fractures in the hip and wrist in older people. For diagnosing these, doctors will get some other tests done such as a computed tomography (CT) scan, magnetic resonance imaging (MRI), or a bone scan.

Treatments
Fractures have to be treated by doctors. The doctors set the fractured bones in their proper place and hold them there so that they can heal. Setting a bone is called "reduction." Reduction without surgery is called "closed reduction." But if the fracture is serious, it s going to require surgery with bone repositioning, called open reduction.

In extreme cases, pins, plates, screws, rods, or glue are used to hold the fractured bones in place, inside the body. Once the bone abutment has been treated, the bone is immobilised to allow the broken pieces to heal. In most cases, the fractured part is set in a rigid cast. The fractured ends of the bone can be fixed into place using metal pins connected to an external frame. This is removed after the bone has healed.

Fractures - How To Diagnose Them?

An orthopaedic fracture is a serious issue that will require lots of care for the bones to heal and re-join. A broken bone is usually plastered so that the tissue may grow back together by fusing eventually, over a period of weeks. When these bones begin to rebuild in an effort to come together, the new bones are called soft callus. This will require lots of energy, which primarily comes from calories. This ensures that essential proteins like amino acids can be taken from the right type of food which would stimulate good blood flow. 

So, let us take a look at the best diet that one can follow in order to recover from a fracture.

Kale: Leafy green vegetables and herbs like kale can help in supplying good amount of protein and iron as well as calcium, which is highly important for good and strong bones. One can also find plenty of calcium in salmon and other kinds of sea food like sardines; consuming these can speed up the process. Sea vegetables like seaweed can also help in the process.
Yogurt: Calcium can be supplied by various other kinds of food including yogurt, which has two kinds of amino acids. These amino acids are lysine and glutamine, which can assist the bones in swift calcium absorption for better recovery of the broken bones.
Spinach: This is a very important ingredient in the bone healing process thanks to its dual elements of calcium and zinc, which come together to cause the appropriate chemical reaction for bone rebuilding. Other zinc heavy food items include pumpkin seeds and wheat germ as well as red meat.
Broccoli: Ingredients like broccoli are rich in Vitamin K1, which is known to very good for the bone recovery process. This vitamin helps in mineralisation of the bone so that they may fuse with each other and form a new mass. One can have up to one cup of this green vegetable per day for a quick and effective fracture recovery process. Other ingredients like cheese and raw dairy products are known to have plenty of this vitamin as well.
Green Bell Peppers: High on vitamin C which helps in producing the skin and tissue structuring element called collagen, green bell peppers are an excellent ingredient that can help you in your fracture healing process. Vitamin C can also be found in citrus fruits like oranges, strawberries as well as tomatoes.
Milk: While milk has plenty of calcium, it also has another important ingredient called vitamin D. When calcium and vitamin D come together, the bones tend to heal much faster as vitamin D helps the bones in absorbing the calcium at a much high rate.

Recovering from Fracture - 6 Foods You Must Consume

Don't wait any longer, manage your Column Traumatology online with a Lybrate doctor today

Consult for Column Traumatology - Online and Easy!

FilterClear All

COMMON SPECIALITIES

COMMON ISSUES