Total Hip Replacement is also known as Total Hip Arthroplasty, in which the damaged cartilage and bones in the hip area are removed and replaced with prosthetic components. On the other hand, Total Knee Replacement, also known as Total Knee Arthroplasty or resurfacing, involves replacing the bone surface of the knee area. 

Causes of Hip and Knee Pain 

Arthritis is the most common cause of chronic hip and knee pain or disability. Other causes include: 

  Avascular necrosis or Osteonecrosis is a condition where there is an inadequate supply of blood to the femoral head due to a hip injury. The inadequate supply of blood may cause the bone surface to collapse and this can result in arthritis. 

  Rheumatoid Arthritis is the most common inflammatory Arthritis. In this condition, the synovial membrane surrounding the joint begins to thicken and become inflamed. This results in cartilage loss, stiffness, and pain. 

  Osteoarthritis is the type of arthritis, usually related to old age but can occur among young people too. The cartilage cushioning the hip and knee bones becomes soft and gradually wears off. The bones eventually start rubbing against each other which causes stiffness and pain in the knee and hip area. 

  Post-Traumatic Arthritis can follow a severe hip and knee fracture or injury. 

  Some children with hip disease or problem, even after treatment, can develop into arthritis later. This may be caused by uneven or unusual growth of hip which affects the joint surfaces. 

Knee Replacement Procedure 

  Bone Preparation: The surface of impaired cartilage at the end of the tibia and femur are separated besides a small extent of the underlying bone. 

  Locating the Metal Implants: The removed bone and cartilage are substituted by metal implants creating the joint surface. These metal pieces may either be press-fit or cemented into the bone. 

  Resurfacing the Patella: The undersurface of the kneecap or Patella is cropped and reformed with a plastic button. This process is variable depending upon the condition. 

  Inserting a Spacer: To form a smooth gliding surface, a plastic spacer of medical-grade is positioned between the metal components. 

Hip Replacement Procedure 

  Metal stem replaces the damaged femoral head and positioned into the femur s hollow center. 

  On the upper portion of the stem, a ceramic or metal ball is planted. This ball acts as a substitute for the damaged/detached femoral head. 

  The damaged Acetabulum or cartilage surface of the socket is discarded and supplanted by a metal socket. Cement or screws are used to sustain the socket in place. 

  A spacer, either metallic, plastic or ceramic is placed between the socket and the new ball for a smooth gliding surface. 

Take Away 

Knee and Hip Replacement are taken as the last option for the patient. The surgery and its outcome vary depending upon various factors. One should consult the doctor before undergoing for the Hip and Knee Replacement Surgery.

Primary Knee & Hip Replacement - Know More About Them!

Tennis elbow is a type of tendinitis. It is usually the swelling of certain ligaments. It causes pain in the elbow as well as the arm. These ligaments are bands of strong and stretchable tissues that connect the muscles of your lower arm to your elbow. In spite of its name, you can in any case get tennis elbow regardless of the possibility that you have never been close to a tennis court. This is merely a name for the condition and has little to do with the sport. It can affect anyone who indulges in a swinging motion.

Any repetitive exercises that require a tight grip, particularly in cases where the thumb and the initial two fingers are used frequently, may cause tennis elbow. Tennis elbow is the most common reason for patients to see their doctors for elbow torment. It can occur in individuals of all ages; however, it is most common and normal at about the age of forty.

This condition is usually caused when there are repeated contractions of the lower arm muscles that you use to raise your hand and wrist as well as to straighten it. The repetitive movements and pressure to the tissue may bring about a series of little tears in the ligaments that connect the lower arm muscles to the hard surface on the outside of the elbow.

Tennis elbow ordinarily occurs after some time. Dull movements such as holding a racket during a swing can strain the muscles and put a lot of weight on the ligaments. That consistent pulling can cause a small amount of tears in the tissue. Tennis elbow may be caused because of the following reasons:

Playing tennis
Playing racquetball
Playing squash
Fencing
Weight lifting or any other stressful exercises involving the muscles
In tennis, the following moves can lead to tennis elbow:

One-handed backstroke with a poor stance or lose hand
A late forehand swing bringing a bend in the wrist altogether
Snapping and turning the wrist while hitting with full power
As the name suggests, playing tennis, particularly repeated use of the backhand stroke with poor strategy, is a conceivable reason for tennis elbow.
However, a number of other basic arm movements can also cause tennis elbow. It can also affect individuals with particular occupations or while performing leisure activities that require heavy arm movements or gripping, for example, the following:

Carpentry
Excessive writing
Painting
Raking
Weaving or knitting
Utilising plumbing devices
Driving screws
Chopping cooking ingredients or vegetables, especially meat
Repetitive computer mouse utilisation
Lifting heavy materials or even grocery bags
There are a number of ways to treat a tennis elbow. These include certain over-the-counter (OTC) medicines. If those do not work, seek the help of a specialist or physiotherapist. He or she can recommend you the right kind of medicines as well as exercises needed for the recovery.

Tennis Elbow - Common Causes Behind It!

Non-inflammatory pain and tenderness in joints, muscles and ligaments can lead to a chronic condition called Fibromyalgia. It is estimated that it affects 5 % of the population annually. Though there are many conventional medications available to address this situation, none of them focuses on healing the disease from the root. This is precisely where Ayurvedic techniques differ. Let us look at a time tested way to address Fibromyalgia through ancient Ayurveda.

Ayurveda for Fibromyalgia
There are some common symptoms of Fibromyalgia. These include aches and stiffness of the body, generalized fatigue, chronic headaches and migraines, swelling and numbing sensations in the joints. Ayurveda treats a particular disease on the basis of the  vata  imbalance. The condition also affects the central nervous system thus leading to pain and tenderness. Accumulation of Ama or toxins is also the other major factor for Fibromyalgia.

Ayurveda focuses mainly on these two factors and creates a balance in suppressing them. The famed panchakarma therapy and the herbal oil massage can help in reducing the toxin levels. They also work additionally as a detox thus helping in eradicating the harmful by-products. Along with it, a diet plan should also be followed for stimulating the growth naturally. These include vegetables, fibers, and juices of carrot, cucumber, beetroot, spices like cumin, coriander, ginger asafetida and coconut milk.

Also, some limitations are needed, and a person should avoid spicy foods and reduce the intake of caffeine products. Alcohol should be curbed when a person is under the treatment plan. Few herbs like "Dashamula quath" and 'Triphala choorna' are recommended for cleansing the colon. Mental stress is also one of the major factors, and hence a relaxed attitude should be followed along with certain lifestyle changes. Ayurveda wants the body to get the necessary sleep and rest in its treatment plan. In the treatment of Fibromyalgia too, it is no different. The Ayurvedic physician would lay out the entire cycle of the treatment procedure, and they have to be followed religiously. A person can see the reduction in the pain within a few weeks of following the treatment.

Ayurveda is safe
The biggest advantage of an Ayurvedic treatment is that it is extremely safe and that there are no side effects. They effectively act as a detox thus getting rid of the harmful substances from the body along with curing of the symptoms. Ayurveda not only takes care of the pain but identifies the problem from the root. Hence it effectively curbs the chances of Fibromyalgia from reoccurring.

Fibromyalgia - How Ayurveda Is Safe For It?

Repairing shoulder tendons through a telescope! When doctors talk about shoulder tendon repair, often they may be refering to rotator cuff surgery. The rotator cuff is a set of tendons and muscles that together form the cuff above the shoulder joint. The rotator cuff is responsible for stabilizing & keeping the arm within the joint, at the same time enabling the joint to move freely without any hindrance.

Thus it is responsible for maintaining strength of the shoulder. The tendons can become damaged due to injury or even overuse. When this occurs, the rotator cuff can be repaired with the help of surgery. Generally, a rotator cuff surgery makes use of an incision.

A shoulder arthroscopy, on the other hand, makes use of smaller incisions and repair is done with the help of a telescope.

Here are some of the commonly used techniques to repair a rotator cuff tear:

  When going for an open repair, the surgical incision is made and the deltoid gently moves out of the way making room to perform the surgery. Rarely an open repair method may prescribed for complex and larger tears or if any associated procedures are to be performed.

  In the case of the arthroscopy procedure, the small camera referred to as an arthroscope is put inside the small key hole incision that has already been made. The arthroscope, which connects to a video monitor, enables the surgeon to view the complete interior region of the shoulder. Further, few more incisions are made in order to allow insertion of various other instruments. During this surgical procedure, the damaged tissues are removed, or they are repaired depending on the damage levels. All of this is done with the help of an arthroscope.

Repairing the rotator cuff:

  In order to do so, the tendons need to be re-affixed to the bone.

  Small rivets referred to as suture anchors help to refasten the tendon and the bone. The suture is usually made of a special strong material that holds the repair for a long duration.

  The sutures are responsible for tying the tendon to the bone.

Why is this surgery recommended?

The physician recommends a rotator cuff tear or tendon surgery when the patient experiences pain while sleeping at night or faces difficulty carrying out daily physical activities, or when it has shown little improvement over the months in spite of exercising. This procedure is also recommended for people who lift heavy weights or are involved in sports activities. Moreover, the risks associated with this procedure are few and common to all surgical procedures.

A rotator cuff surgery performed arthroscopically has a very high success rate as it is performed under magnification. The procedure is far more precise than an open surgical procedure. Any associated injuries within the shoulder can be tackled simutaneously thus leaving very little room for errors. The recovery is therefore complete and faster due its minimally invasive nature.

Repairing Shoulder Tendons Through Surgery!

A bone fracture is often abbreviated as FX or # and is a painful medical condition that causes damage in the continuity of the bone. A dictionary meaning of fracture is a separation of an object or a material into two or more pieces under the action of stress.


A bone fracture could be due to a high force impact or stress, an injury from trauma or sports or even certain medical conditions that weaken the bones, such as osteoporosis, bone cancer or osteogenesis imperfecta.


However, a significant number of fractures occur due to high force impact or stress. A fracture could be simple where the skin is not exposed or compound where skin gets exposed. A fracture could be complete where the bone breaks up in two pieces or could be incomplete with a crack in the bone.


Treatment of bone fracture depends on the type of fracture. In a large number of cases, the bone is aligned through a cast or splint. However, a very crucial part in the recovery of the treatment is physiotherapy. Physiotherapy is a comprehensive care plan designed for the patient for optimal and complete recovery. Yet most patients do not understand its effectiveness. In layman's terms physiotherapy is understood as few exercises or messages designed to aid the patient's treatment. However, Physiotherapy not only aids the recovery, it effectively promotes healing, reduces pain and stiffness and gradually helps the patient to return back to his/her normal daily activities of life.


Physiotherapy is a complete preventive and rehabilitative approach to treatment and must begin as early as possible and continue post fracture. Physiotherapy has been proven to be effective in preventing post fracture stiffness and weakness that occurs in adjacent joints and muscles generally during the first six weeks of the healing process. If the X-ray shows poor healing, physiotherapy is a medium used to help the patient regain muscle strength and speed up recovery.


Irregular movements can lead the bones to further damage the surrounding tissues and muscles. Damage may also lead to infection, especially in compound fractures where the skin is exposed. Thus, physiotherapy regulates the movements, supports healing and prevents further damage. Physiotherapy not only involves messages or exercises. It includes a range of interventions designed for prevention and rehabilitation of patients. These interventions include pain management, education and awareness on safety and prevention of injury, strength building and flexibility exercises and in some cases taping, bracing and electrotherapy.


To add to its benefits, physiotherapy procedures are also completely safe and are supported by medical science. These procedures also do not have any side effects. Always remember to consult your orthopedic doctor as he can guide you towards the best physiotherapy treatment.


Stay fit and healthy!"

Physiotherapy - Why it is Critical for Recovery from Fracture?

When you experience any kind of bone and joint pain, you may be wondering what the best remedy might be to get relief. Some people ignore the pain, and it worsens, while others take over-the-counter medicines. However, the best remedy for bone and joint pain is to visit a pain management specialist. The field of pain management has evolved over the last twenty years. Nowadays, there are dedicated pain management specialists who are experts in treating bone and joint pain.

Here are 3 reasons to consult a pain management specialist for bone and joint pain:
1. Pain management specialists are trained especially for understanding any kind of bone or joint pain. They undergo special training based on bone and joint pain management and thus know how best to recognize and treat such pains.

2. Pain management specialists have a multidisciplinary approach towards treating bone and joint pain. The aim of pain management is to provide overall treatment and pain management specialists know about the best ways to take care of joint and bone pains. Pain management involves interventional procedures, psychological therapies, medication management and physical therapies. Pain management specialists also provide you with lifestyle modification remedies and assign you exercise schedules and diet plans. Alternative medicines like acupuncture and massage therapies are also provided by pain management specialists.

3. Pain management specialists cooperate with you and come up with the best solution for your bone and joint pain. Pain is such an aspect, which has no fixed cure and the remedy varies from person to person and depends on the nature and severity of the pain. Thus everyone should receive a personalized treatment, which is most suitable to cure the pain that has occurred to them. Pain management specialists work with patients, discuss a lot and come up with the best treatment procedure, which would complement the patient. For example, a neurostimulation device can be prescribed to a patient who suffers from complex regional pain syndrome and did not have success with other treatment procedures. In many patients with a shattered spinal disc, pain management specialists prescribe injections, which work effectively to give relief and treat the condition.

A pain management specialist can make the best assessments on bone and joint pain. Being trained especially in bone and joint pain management, you can bank upon pain management specialists to receive the best treatment for your bone or joint pain.

3 Reasons to See a Pain Management Specialist for Bone and Joint Pain

Don't wait any longer, manage your Clinical Physiotherapist online with a Lybrate doctor today

Consult for Clinical Physiotherapist - Online and Easy!

FilterClear All

COMMON SPECIALITIES

COMMON ISSUES