The carpal tunnel is the passageway for the median nerve to pass through on the inner side of your hand, when your palms are facing down. For example, while typing, there is a lot of movement of the fingers and this puts a lot of pressure on this tunnel. In fact, people who are involved in a lot of typing are one of the most prone people for carpal tunnel syndrome (CTS). Other causes would include trauma, fractures, etc., where the tunnel is injured.

Conventional measures to treat CTS included a combination of exercise and pain killers in mild to moderate cases. In moderate (sometimes) to severe cases, surgery was also done. However, with advancements in medical technology, endoscopic surgical procedure is gaining popularity.

What is done?
In endoscopic surgery, a small incision is made in the wrist or one each in the palm and the wrist. Through this, a flexible tube with a camera and minute cutting tools are inserted into the wrist. Another ligament known as transverse carpal ligament is cut. This reduces the pressure on the median nerve, which provides relief from the CTS symptoms.

What to expect as benefits?
The intention behind the surgery remains the same in both traditional and endoscopic procedures. The pressure on the median nerve is released, restoring movement and reducing pain in the joints. In addition, the endoscopic procedure has the following benefits.

Less invasive: Needless to say, there are only one or two small incisions done for this procedure, so less surrounding tissue is damaged.
Same day surgery: No hospitalization is required, and unless required, the patient can return home on the same day of surgery.
Reduced recovery time: The recovery period is usually substantially less compared to the traditional surgical approach.
Back to work: Depending on which is your dominant hand, you would be able to return to your regular work earlier than with regular surgery. If your non-dominant hand is involved, a day or two of rest is required. If your dominant hand was involved, give it up to four weeks for complete recovery.
Reduced chances of nerve injury: The area of operation has many nerves and blood vessels, and endoscopic surgery reduces the chances of damaging adjacent nerves.
Anesthesia: This is done under local anesthesia. Therefore, complications arising out of general anesthesia are completely avoided.
Indications
While these sound promising, your doctor will decide if you are a candidate for endoscopic procedure depending on the following:

Nonsurgical treatment including exercise and pain killers have not provided relief, even after several months.
Severe symptoms including those of nerve damage, like loss of sensation, altered coordination, etc., is affecting your normal daily routine.
Person requiring bilateral surgery like severe trauma, wheelchair dependent, etc.

Carpal Tunnel - How Endoscopic Surgery is Beneficial?

Lower back pain is one of the most common ailments among adults all across the world. You may wake up in the morning with an energising drink before going out to work. After you arrive at work, you may have to sit there till lunch, which involves further sitting and you are required to sit for more hours for completing the remaining work. Then you come back home by sitting in the car and have the night s meal while again sitting. Did you know sitting through the day is the major culprit behind your back pain? Thankfully, yoga has effective ways of treating back pain to a considerable degree.

You can choose to do the following yoga poses for alleviating your back ache:

Supine hamstring stretch: You will have to lie back on your back and bend the right knee to the chest. Then you will have to place a rolled-up towel around the football and straighten the leg towards the ceiling and press both the heels. In case your lower back feels strained, you can bend your left knee and place the foot right on the ground. Hold the position for about 3 to 5 minutes and practice regularly for soothing back pain.
Two knee twist: You will have to bend your knees to the chest while lying on the back and try to bring out the arms forming a T-shape. Then try to exhale and lower down the knees on the ground towards your right side. Keep both the shoulders pressed down firmly and hold this position for about 2 minutes for best results.
Sphinx: You will have to prop yourself on the forearms while lying on the stomach. You will then have to align the elbows right under the shoulders and press through the tops and palms of the feet. You are likely to feel terrific sensations down your lower back, but it is advised to bear through it as it allows the flow of blood to that region which is required for healing. Practice the position regularly and hold it for at least one minute.
Thread the needle: This is quite an easier pose where you will have to lie flat on your back by bending both the knees with your feet flat on the ground. You will now have to bend the right knee by placing the outer left ankle through the right thigh. You will have to thread the right hand between the leg and interlace the hands behind the left thigh.
These positions would help in soothing your lower back pain, but it is recommended to consult a doctor if the pain still persists. Ayurvedic Tiktaksheer basti, massage therapy and certain oral medicines can help a lot in speedy recovery from spine/back related problems.

Ayurved has a very unique way of drug administration called Basti in which various medicines are given through the anus ( Rectal route)...For Lumbosacral / spine disorders a very specialised form of enema Tiktaksheer Basti (Medicated Bitter Milk enema) is given which shows amazing results. Kindly consult a specialized Ayurvedic practitioner for additional details.

Kati Basti (Vasti) is a traditional Ayurvedic treatment used for lower backache and disorders of lumbosacral region, including slip disc, lumbar spondylosis, sciatica, spinal problems etc. Kati Vasti is a part of external oleation (Snehana) therapy in Ayurveda. It is very safe, non-invasive and green category procedure.

In this procedure, you will get instant relief from backache. After completing a course of 7 to 21 days, you may not need any kind of oral medicines. It is a complete therapy for back pain and lumbosacral disorders.

However, the results vary person to person, but in most of cases, people get quick relief after the procedure.

Lower Back Pain - 4 Yoga Asanas For Treating it

Hip arthroscopy is a minimally invasive surgical procedure in which doctors view the joint problem without making any cuts through the skin and other soft tissues. Hip Arthroscopy is performed to treat several hip problems.

In Hip Arthroscopy, the doctors insert an arthroscope (a small camera) into the hip joint. The pictures are displayed on a video monitor with the help of an arthroscope. The surgeons will use these images to guide the surgical instrument.

As the surgical instrument and arthroscope are very thin, the surgeons make a very small incision compared to the one that is done in open surgery. As a result, patients feel less pain and stiffness in joints. This type of surgery also takes less time to recover and one can return to their normal life within a short period of time.

Hip Anatomy:

The hip is a socket and ball joint. The socket is formed by a part of a large pelvis bone called acetabulum. The ball joint is on the upper end of the femur (thighbone). Articular cartilage is a slippery tissue that covers the surface of the socket and ball. It creates a frictionless and smooth surface that helps the bones to glide across each other easily. Strong fibrocartilage is ringed on the acetabulum called labrum. It creates a gasket around the socket.

The joint is surrounded by a ligament, which creates a capsule to hold the joint together. The inner surface of the capsule is lined by a membrane called synovium. It produces a synovial fluid that helps in lubricating the joints.

When to Recommend Hip Arthroscopy?

If a person is suffering from chronic pain and does not respond to any other nonsurgical treatment, including physical therapy and medication, doctors may recommend a person opt for hip arthroscopy.

Hip arthroscopy helps a person to get relief from many problems that cause painful symptoms including damaged articular cartilage, labrum, or other soft tissues. The damage can be the result of any form of injury. However, there are other orthopedic conditions that can also lead to damage. The orthopedic conditions include:

Femoroacetabular Impingement (FAI):

In this type of disorder, an extra bone is developed on the femoral head (cam impingement) or along the acetabulum (pincer impingement). The overgrowth of the bone is known as spurs that damage the soft tissues surrounding the hip joint. In most cases, the bone spurs develop in either part. However, there are cases in which the bone spurs develop in both femoral head and acetabulum.

Dysplasia:

In this condition, the hip socket is abnormally shallow. Due to this problem, more stress is put on the labrum in order to keep the femoral head within the socket. This may raise the condition of the labral tear.

Snapping Hip Syndrome:

In this condition, the tendon rubs across the hip joint repeatedly. This type of popping or snapping is generally harmless and can be repaired without any treatment. However, the tendon may be fully damaged due to continuous rubbing in some cases.

Other conditions where hip arthroscopy is recommended include synovitis, hip joint infection, and labral tear.

Arthroscopic Femoroacetabular Surgery:

If the diagnosis results show that damage is caused by femoroacetabular impingement and a patient is not getting relieved from pain by any nonsurgical method, doctors recommend going for Arthroscopic Femoroacetabular Surgery.

In this type of surgery, the doctor repair and clear out the damage of the articular cartilage and labrum. He may also trim the rim of the acetabulum bone and shave the bump of the femoral head.

Arthroscopic Labral Repair:

If patients are not getting relief from conservative treatment, doctors recommend Arthroscopic Labral Repair. In this type of surgery, surgeons cut out and remove the damaged or torn part of the labrum. He further repairs the torn part by sewing it.

Take Away:

Both treatment methods are minimal incision processes and require fewer hospital stays. However, it is always advisable to consult a doctor before opting for any treatment.

Know More About Hip Arthroscopic Surgery!

Spinal fractures are extremely painful and usually happen when an external force applied to the spine exceeds the vertebral column s ability to bear the load. Many times, the bone fragments pinch and damage the spinal cord, which leads to an injury or dislocation of the bony vertebra. Although spinal fractures can develop anywhere along the spine, the most common site is the lower back.

What causes spinal fractures?

Spinal fractures can occur due to both minor trauma/falls and major accidents. The following are the probable causes of such fractures-

  Injuries sustained while playing a sport
  A traumatic injury
  Spinal instability
  Injuries sustained after falling from a height
  A whiplash
  Injuries sustained in an accident
  An underlying condition such as Osteoporosis, which causes the spinal bones to weaken

Symptoms observed:

Spinal fractures are characterized by the following symptoms-

  Muscle spasm and swelling
  Numbness
  Acute pain that worsens when you walk or stand for a long time
  A tingling sensation
  Restricted mobility of the spinal column
  Spinal deformity/disability
  Sudden onset of pain in the lower back region

What are the various types of spinal fractures?

Spinal fractures primarily fall into four categories, namely the following-

  Compression - Compression fractures are quite common in people with osteoporosis or bone cancer. The bones become fragile and brittle. If sudden force is applied with extreme pressure, the vertebra may not be able to support the load and that may result in a fracture.

  Burst - Severe trauma, such as a car accident can cause burst fractures. The external pressure is so much that the vertebra gets crushed. As a result, the bony fragments spread out and cause spinal cord injury. Unlike a compression fracture, where only a part of the vertebra is damaged, a burst fracture leads to multiple fractures in the vertebra.

  Flexion-distraction - This type of fracture is likely to happen if you are involved in a car accident. Normally, the spine is made to flex forward. However, a sudden jerk that pushes your body forward can put a lot of pressure on the spine and cause the vertebrae to break.

  Fracture-dislocation - This debilitating condition results from a torn ligament and broken bone.

What is the treatment for spinal fractures?

Treatment options for spinal fractures include both non-surgical and surgical methods.

  Non-surgical treatment - Most cases of spinal fractures can be treated with immobilization in a corset or brace for up to 10-12 weeks. Bracing will help prevent deformity and reduce pain.

  Surgical treatment - The doctor may recommend surgery in severe cases. The two standard surgical procedures are-

Vertebroplasty - The surgeon will insert a tube, known as a catheter, into the compressed vertebra. Through the catheter, he/she will inject bone cement into the fracture site. This will harden and stabilize the vertebral column. Vertebroplasty has proved to be an effective procedure to reduce pain. The surgery restores mobility and prevents loss of bone due to bed rest.

Kyphoplasty - During this procedure, the surgeon inserts a catheter into the spinal column under the guidance of an X-ray. Next, he/she makes small incisions along the back and inserts an inflatable bone stamp. The tamp, once inflated, bring back the vertebral body to its original height. It also creates a cavity to be filled with bone cement, which seals the cracks. The bone cement stops the vertebra from collapsing again. After the whole procedure, the surgeon will remove the catheter and stitch the incisions.

Following surgery, you will need to wear a brace for about 6-12 weeks. Physical therapy is strongly recommended initially to help you get back to your daily activities in a week or two.

Spinal Fractures - All You Should Know!

Total Hip Replacement is also known as Total Hip Arthroplasty, in which the damaged cartilage and bones in the hip area are removed and replaced with prosthetic components. On the other hand, Total Knee Replacement, also known as Total Knee Arthroplasty or resurfacing, involves replacing the bone surface of the knee area. 

Causes of Hip and Knee Pain 

Arthritis is the most common cause of chronic hip and knee pain or disability. Other causes include: 

  Avascular necrosis or Osteonecrosis is a condition where there is an inadequate supply of blood to the femoral head due to a hip injury. The inadequate supply of blood may cause the bone surface to collapse and this can result in arthritis. 

  Rheumatoid Arthritis is the most common inflammatory Arthritis. In this condition, the synovial membrane surrounding the joint begins to thicken and become inflamed. This results in cartilage loss, stiffness, and pain. 

  Osteoarthritis is the type of arthritis, usually related to old age but can occur among young people too. The cartilage cushioning the hip and knee bones becomes soft and gradually wears off. The bones eventually start rubbing against each other which causes stiffness and pain in the knee and hip area. 

  Post-Traumatic Arthritis can follow a severe hip and knee fracture or injury. 

  Some children with hip disease or problem, even after treatment, can develop into arthritis later. This may be caused by uneven or unusual growth of hip which affects the joint surfaces. 

Knee Replacement Procedure 

  Bone Preparation: The surface of impaired cartilage at the end of the tibia and femur are separated besides a small extent of the underlying bone. 

  Locating the Metal Implants: The removed bone and cartilage are substituted by metal implants creating the joint surface. These metal pieces may either be press-fit or cemented into the bone. 

  Resurfacing the Patella: The undersurface of the kneecap or Patella is cropped and reformed with a plastic button. This process is variable depending upon the condition. 

  Inserting a Spacer: To form a smooth gliding surface, a plastic spacer of medical-grade is positioned between the metal components. 

Hip Replacement Procedure 

  Metal stem replaces the damaged femoral head and positioned into the femur s hollow center. 

  On the upper portion of the stem, a ceramic or metal ball is planted. This ball acts as a substitute for the damaged/detached femoral head. 

  The damaged Acetabulum or cartilage surface of the socket is discarded and supplanted by a metal socket. Cement or screws are used to sustain the socket in place. 

  A spacer, either metallic, plastic or ceramic is placed between the socket and the new ball for a smooth gliding surface. 

Take Away 

Knee and Hip Replacement are taken as the last option for the patient. The surgery and its outcome vary depending upon various factors. One should consult the doctor before undergoing for the Hip and Knee Replacement Surgery.

Primary Knee & Hip Replacement - Know More About Them!

Radiology is a special branch of medical science that uses various techniques of imaging for the diagnosis and the treatment of several types of diseases in the body. The different types of imaging techniques used in radiology are X-rays, Computerised Tomographic scan (CT Scan), ultrasound, Magnetic Resonance Imaging (MRI) and nuclear medicine which includes Positron Emission Tomography(PET).

Role played in evaluating hip replacement
Hip replacement surgeries have become extremely common in the recent times, and radiological evaluation remains the mainstay of the overall hip replacement procedure. Thus, the role played by radiology is quite significant in such situations. All the specific anatomical landmarks and the measurements are used to make sure the placement is perfect during the hip replacement surgery. Radiological imaging helps in the assessment of the following conditions that are as discussed below.

The length of leg
The inequality in the length of the two legs is prevalent after a hip replacement surgery which can create a great deal of discomfort and inconvenience to the patients. A greater difference in the length of the two legs increases the chances of dislocation, and this is a situation where radiological evaluation plays a crucial role. With the help of radiological imaging, the length of the legs can be made almost equal.

The horizontal center of rotation
In this case, horizontal center of rotation helps in the assessment of the acetabular component of the prosthesis. This is calculated by the measurement of the distance between the center of the head of the femur and the acetabular teardrop. This distance should be bilaterally equal, and it is just not possible without the help of the imaging techniques of radiology.

Acetabular inclination
The acetabular inclination is the angle formed between the face of the cup and the transverse axis. If the angle is less, then it results in a stable hip, but the abduction is limited. On the other hand, if the angle increases then there are high chances of dislocation of the hip. Thus, with the help of radiological evaluation, proper and effective angular inclination is given which is optimum for the patient.

The stem positioning of the femur
The main aim of the stem positioning of the femur in a hip replacement surgery is placing the stem in a position which is neutral within the shaft. To get a proper idea of the positioning, the imaging techniques are of utmost importance which cannot be achieved perfectly without the imaging.

Thus, the crucial role the different techniques of radiological imaging plays during the overall procedure of a hip replacement surgery can be perceived. With the use of the different imaging techniques, the results obtained are closer to perfection.

How Radiological Evaluation Can Help In Case Of Hip Replacement?

Don't wait any longer, manage your Therapeutic Laser online with a Lybrate doctor today

Consult for Therapeutic Laser - Online and Easy!

FilterClear All

COMMON SPECIALITIES

COMMON ISSUES