Pain related sleep disruption has affected a large number of people around the globe. Statistics has it that, in India, about 25% of the population suffers from pain-related sleep deprivation. Studies call it  the vicious cycle of pain and sleep  as pain affects your ability to sleep and lack of sleep makes the pain even worse.

Back pain and arthritis are examples of some common pain-related medical disorders. People with these types of chronic pains have reported persistent sleeplessness or have had immense trouble falling asleep.

The following are the primary sleep disorders associated with chronic pain:

Insomnia: It is a medical condition that is characterized by an inability to fall asleep no matter how physically exhausted you are. Insomnia can be acute (lasting for one night to a week) or chronic (that lasts for more than 3 weeks).
Hypersomnia: It is a condition wherein you tend to sleep excessively; in this condition, you will have trouble being awake throughout the day or can fall asleep at any point of time.
Sleep Apnoea: This is a sleep disorder wherein breathing pauses and resumes repeatedly. Risk factors include obesity, age and gender; it is more commonly observed in men. This condition can be chronic with symptoms such as snoring loudly or feeling very tired even after one has had a night s sleep.
Restless leg syndrome: It is a sleep disorder wherein you continuously move your legs while sleeping. However, this condition can also cause you to move your legs even if you aren t sleeping.
Some of the causes of sleep disorders due to chronic pain are:

Pain
Worry and anxiety
Sweating at night
Depression and other mental disorders
Treatment

A pain and sleep disorder should be simultaneous as both the components of it, pain and sleep, are interrelated. Some of the ways people with chronic pain can still have a good night s sleep are:

Limiting caffeine intake
Abstaining from alcohol and smoking, as these disrupt the sleep cycles, thus aggravating the existing pain.
Practicing meditation and other relaxation techniques
Pain killers or sleeping pills can be administered, but only with the doctor s advice.
Hot water fomentation over painful area during night, for better sleep.

Back Pain and Bad Sleep

A broken bone or a crack in the commonly known as a fracture. Any bone in the arm can be broken, but common areas for fractures in the arm is wrist, specifically the distal radius, forearm bones (radius and ulna), elbow, humerus and shoulder. 

What causes fracture in bones?

Fall: Falling an outstretched hand or elbow is the most common cause of a broken arm.
Sports injuries: Direct blows and injuries on the field or court are a common cause of all types of arm fractures.
Significant trauma: Any of your arm bones can break during a car accident, bike accident or other direct trauma.
Abuse: In children, a broken arm may be the result of child abuse.
How to identify?

An audible snap or cracking sound may be your first indication you've broken an arm.

Signs and symptoms include:

Severe pain, which may increase with movement
Swelling
Bruising
Deformity, such as a bent arm or wrist
Inability to turn your arm from palm up to palm down or vice versa
When to see a doctor?

If you have enough pain in your arm that you can't use it normally, see a doctor right away and do the same for your child. Delay in diagnosis and treatment of a broken arm, especially for children who heal faster than adults do, can lead to poor healing and deformity.

Fracture In Upper Limb Bones - 4 Things That Can Cause It

Spinal fractures are extremely painful and usually happen when an external force applied to the spine exceeds the vertebral column s ability to bear the load. Many times, the bone fragments pinch and damage the spinal cord, which leads to an injury or dislocation of the bony vertebra. Although spinal fractures can develop anywhere along the spine, the most common site is the lower back.

What causes spinal fractures?

Spinal fractures can occur due to both minor trauma/falls and major accidents. The following are the probable causes of such fractures-

  Injuries sustained while playing a sport
  A traumatic injury
  Spinal instability
  Injuries sustained after falling from a height
  A whiplash
  Injuries sustained in an accident
  An underlying condition such as Osteoporosis, which causes the spinal bones to weaken

Symptoms observed:

Spinal fractures are characterized by the following symptoms-

  Muscle spasm and swelling
  Numbness
  Acute pain that worsens when you walk or stand for a long time
  A tingling sensation
  Restricted mobility of the spinal column
  Spinal deformity/disability
  Sudden onset of pain in the lower back region

What are the various types of spinal fractures?

Spinal fractures primarily fall into four categories, namely the following-

  Compression - Compression fractures are quite common in people with osteoporosis or bone cancer. The bones become fragile and brittle. If sudden force is applied with extreme pressure, the vertebra may not be able to support the load and that may result in a fracture.

  Burst - Severe trauma, such as a car accident can cause burst fractures. The external pressure is so much that the vertebra gets crushed. As a result, the bony fragments spread out and cause spinal cord injury. Unlike a compression fracture, where only a part of the vertebra is damaged, a burst fracture leads to multiple fractures in the vertebra.

  Flexion-distraction - This type of fracture is likely to happen if you are involved in a car accident. Normally, the spine is made to flex forward. However, a sudden jerk that pushes your body forward can put a lot of pressure on the spine and cause the vertebrae to break.

  Fracture-dislocation - This debilitating condition results from a torn ligament and broken bone.

What is the treatment for spinal fractures?

Treatment options for spinal fractures include both non-surgical and surgical methods.

  Non-surgical treatment - Most cases of spinal fractures can be treated with immobilization in a corset or brace for up to 10-12 weeks. Bracing will help prevent deformity and reduce pain.

  Surgical treatment - The doctor may recommend surgery in severe cases. The two standard surgical procedures are-

Vertebroplasty - The surgeon will insert a tube, known as a catheter, into the compressed vertebra. Through the catheter, he/she will inject bone cement into the fracture site. This will harden and stabilize the vertebral column. Vertebroplasty has proved to be an effective procedure to reduce pain. The surgery restores mobility and prevents loss of bone due to bed rest.

Kyphoplasty - During this procedure, the surgeon inserts a catheter into the spinal column under the guidance of an X-ray. Next, he/she makes small incisions along the back and inserts an inflatable bone stamp. The tamp, once inflated, bring back the vertebral body to its original height. It also creates a cavity to be filled with bone cement, which seals the cracks. The bone cement stops the vertebra from collapsing again. After the whole procedure, the surgeon will remove the catheter and stitch the incisions.

Following surgery, you will need to wear a brace for about 6-12 weeks. Physical therapy is strongly recommended initially to help you get back to your daily activities in a week or two.

Spinal Fractures - All You Should Know!

Total Hip Replacement is also known as Total Hip Arthroplasty, in which the damaged cartilage and bones in the hip area are removed and replaced with prosthetic components. On the other hand, Total Knee Replacement, also known as Total Knee Arthroplasty or resurfacing, involves replacing the bone surface of the knee area. 

Causes of Hip and Knee Pain 

Arthritis is the most common cause of chronic hip and knee pain or disability. Other causes include: 

  Avascular necrosis or Osteonecrosis is a condition where there is an inadequate supply of blood to the femoral head due to a hip injury. The inadequate supply of blood may cause the bone surface to collapse and this can result in arthritis. 

  Rheumatoid Arthritis is the most common inflammatory Arthritis. In this condition, the synovial membrane surrounding the joint begins to thicken and become inflamed. This results in cartilage loss, stiffness, and pain. 

  Osteoarthritis is the type of arthritis, usually related to old age but can occur among young people too. The cartilage cushioning the hip and knee bones becomes soft and gradually wears off. The bones eventually start rubbing against each other which causes stiffness and pain in the knee and hip area. 

  Post-Traumatic Arthritis can follow a severe hip and knee fracture or injury. 

  Some children with hip disease or problem, even after treatment, can develop into arthritis later. This may be caused by uneven or unusual growth of hip which affects the joint surfaces. 

Knee Replacement Procedure 

  Bone Preparation: The surface of impaired cartilage at the end of the tibia and femur are separated besides a small extent of the underlying bone. 

  Locating the Metal Implants: The removed bone and cartilage are substituted by metal implants creating the joint surface. These metal pieces may either be press-fit or cemented into the bone. 

  Resurfacing the Patella: The undersurface of the kneecap or Patella is cropped and reformed with a plastic button. This process is variable depending upon the condition. 

  Inserting a Spacer: To form a smooth gliding surface, a plastic spacer of medical-grade is positioned between the metal components. 

Hip Replacement Procedure 

  Metal stem replaces the damaged femoral head and positioned into the femur s hollow center. 

  On the upper portion of the stem, a ceramic or metal ball is planted. This ball acts as a substitute for the damaged/detached femoral head. 

  The damaged Acetabulum or cartilage surface of the socket is discarded and supplanted by a metal socket. Cement or screws are used to sustain the socket in place. 

  A spacer, either metallic, plastic or ceramic is placed between the socket and the new ball for a smooth gliding surface. 

Take Away 

Knee and Hip Replacement are taken as the last option for the patient. The surgery and its outcome vary depending upon various factors. One should consult the doctor before undergoing for the Hip and Knee Replacement Surgery.

Primary Knee & Hip Replacement - Know More About Them!

Leg bypass surgery is needed when the patient suffers from peripheral artery disease. PAD is a very common condition in elderly people, where the rate of flow of blood to the limbs (in this case, the legs) is reduced due to narrowing of the blood vessels.

Causes and risk factors-

The narrowing of the blood vessels occurs due to excess calcium accumulation and fat deposits in the walls of the arteries. The following are the risk factors of PAD-

  Age (60 years and above)
  Smoking
  Diabetes

The condition may be life-long or can last for years.

Symptoms that indicate you might need a leg bypass surgery-

The following are the signs and symptoms of PAD, which suggest you should consider having a leg bypass surgery-

  Pain in the legs, especially when walking
  Pain in the buttocks
  A sore on a foot/leg that does not seem to heal
  Thinning of the skin on the legs
  Loss of hair on the legs
  Tingling, weakness, or numbness in the legs
  One or both the feet/legs may feel cold
  The feet or legs may appear bluish, pale, or dark reddish in colour

You should get yourself checked by a specialist in the initial stage, or else the condition may get worse and affect your day-to-day activities.

Vascular surgery for PAD in the legs:

Vascular surgery is a surgical sub-specialty, which manages vascular system disorders- disorders of the veins, arteries, and lymphatic circulation- by surgical reconstructions, minimally invasive procedures, and medical therapies.

The most commonly used surgical procedure is the leg bypass surgery. The surgery aims to reroute the supply of blood around an obstructed artery in one of the legs.

How is leg bypass surgery performed?

The surgeon performs leg bypass surgery using a graft (usually made of plastic tube) to bypass or replace the blocked portion of the artery. On some occasions, the graft may be a vein or blood vessel taken from the patient s body (usually, the other leg).

During the surgery, the surgeon will first administer anaesthesia so that you are not able to feel pain or discomfort. He/she will make an incision over the portion of the blocked artery. After carefully removing the skin tissues, the surgeon will place clamps on each side of the narrowed artery and sew the grafts in place. The surgeon will ensure that the flow of blood in your lower extremity (legs) is good. An arteriogram (an X-ray of the arteries/blood vessels) is recommended to make sure that the graft is working fine after the leg bypass surgery.

For most people, leg bypass surgery helps improve the flow of blood in the arteries. The prognosis is better if underlying medical conditions like diabetes are controlled.

Leg Bypass - Treating It Through Vascular Surgery!

Joint pain is considered to be one of the first few signs of aging. According to the science of Ayurveda, joint pain is triggered mainly by an accumulation of toxins in the body. These toxins can create an imbalance in the doshas which in turn can cause pain and inflammation on the joints. Along with joint pain, a person is likely to experience a loss of flexibility, weakness, tenderness and enlargement of the joints.

Unlike some popular forms of medication that focus on relieving the pain, Ayurveda addresses the root cause of the issue. Panchkarma aims at cleansing the body of toxins and clearing blockages in the body s digestive and circulatory system. This helps the vatta dosha flow easily through the body and reduces pain associated with arthritis etc. Panchkarma can be defined as a collection of five ayurvedic techniques. These are:

Vasti or Medicated Enema: Vasti aims at removing toxins and waste products from the body through the colon. In doing this, it cleanses the digestive channels and improves circulation of air or the vatta dosha in the body. With better circulation, joint pain is effectively reduced. An enema also nourishes the body and gives it the strength to rebuild tissues while boosting the immune system.
Abhyanga or Full Body Massage: This technique helps I the removal of toxins from deep tissues within the body. It pacifies the vatta and nourishes the body while simultaneously reducing stress and enabling better quality sleep. A full body massage also helps calm the body both physically and mentally.
Potli or Poultice Massage: As the name suggests, a potli involves massaging the body with medicated herbs tied together in a tiny bundle that has been warmed with medicated oils. This potli is then used to massage the entire body. This technique helps relax the muscles of the body and soothes the aggravated vatta dosha. It is very effective when it comes to providing relief from joint pains caused by arthritis, spondylitis, muscle cramps etc.
Pizhichil or Rich Oil Massage: A rich oil massage involves subjecting the body to streams of lukewarm oil that has medicinal properties while simultaneously softly massaging the body. This type of massage helps relieve tension and stress and is a very effective remedy against joint pains. It is highly recommended in the case of rheumatic diseases.
Svedana or Steam Bath: A steam bath helps cleanse the body both physically and mentally by aiding in the removal of toxins through sweat and calming the mind. It also helps soften the muscles and tissues and dilates the channels in the body.

Joint Pain - How Panchkarma Therapies Can Help You?

Don't wait any longer, manage your Therapeutic Laser online with a Lybrate doctor today

Consult for Therapeutic Laser - Online and Easy!

FilterClear All

COMMON SPECIALITIES

COMMON ISSUES