Body pain and Physiotherapy

Physiotherapy is an effective way to reduce various kinds of body pains. Physiotherapy includes massages, exercises, and heat treatments to relieve pain. This treatment is often recommended as the first option to treat back and neck pain. Physiotherapy is also used to rehabilitate patients after surgery. Different kinds of exercises included in this treatment are also useful to treat sports injuries.  Here are some steps that you can take to relieve your body pain incorporating physiotherapy.

Get appropriate help

It is important to properly diagnose your condition before going for physical therapy. Seek help from a professional and if he/she recommends physiotherapy then only opt for the treatment.

Reduce your severe pain before exercising

If you are in immense pain, work to alleviate the pain before engaging in exercises. Cold/ hot therapy, massage, manual manipulation are some of the methods that can slowly reduce the pain. These are all part of physical therapy.

Exercise

Exercising has numerous health benefits including relieving back pain. As you age, your back tends to get weaker; it is important to workout to prevent future backaches. Stretching, strengthening and low- impact aerobics are ideal for this issue.

You can also try water therapy as water has a therapeutic effect on pain and makes your movements much easier than on land.

Observe your body's reaction to physical therapy

When you have just had a back or neck pain episode and try physical therapy you will feel some initial discomfort, it is expected. After you acclimatize yourself with the routine all kinds of pain will gradually diminish. The initial pain due to physiotherapy is caused because your muscles are stiff and they are being stretched the way they are not used to. However if the pain gradually increases you are probably not right for that particular kind of physical therapy.



Body pain and Physiotherapy

Pain in the joints continues to bug mankind till this very day. There are different types of joint pains, which might occur all of a sudden, with no signs of receding. The most common of them all are arthritis, tennis elbow, frozen shoulder, back pain and repetitive muscular strain. These joint pains are sometimes impossible to diagnose properly by the regular modes of diagnosis. In those cases, resorting to the homeopathic mode of medication might be a good idea as it is a medication based on treating the actual cause of the disease and sustained use might result in complete remission of the pain.

Some commonly used homeopathic medications for pain in the joints are as follows:
1. Rhus Tox: This is the most commonly used in homeopathic preparation for severe joint pains, the symptoms of which include severe pain after relaxation, pain triggered by slightly wet weather and pain after walking or running for a long time.

2. Arnica Montana: When the symptoms are pain in every joint of the body resulting in body aches and pertaining injuries due to accidents, Arnica Montana serves as the perfect medication.

3. Actea Spicata: This medicine is primarily used as a remedy for pains in the small joints of the hands. The symptoms for which the medication can be implemented are rheumatoid arthritis in the joints of the finger and swollen wrists after usage of the hand.

4. Colchium: This medicine can be used in case of Rheumatoid Arthritis (inflammatory and chronic form of arthritis).

5. Bryonia Alba: This medication can work wonders if the symptoms include severe pain in the knee joints while walking, severe swollen joints and osteoarthritis (affects the flexible tissues present at the bone ends).

However, it is always advisable to take medication as prescribed by your doctor, as the potency and frequency can only be decided by your doctor.

Homeopathic Treatment for Pain in the Joints

Panchakarma is an ayurvedic technique which is used to detoxify the body, boost the immune system and restore the balance in the body. Due to lack of exercise and a poor diet, the waste material generated by the body is not effectively discharged. This causes accumulation of toxins in the body that can result in diseases.

Panchakarma can be used to treat and heal the pain in the joints and the spine. There are specific treatments in panchakarma that targets these regions, they are:

1. Abhyanga - Abhyanga is a technique where warm oil is used to cover the entire body. The oil is then gently massaged so that it can penetrate the underlying tissues. It is used to lubricate the joints, muscle toning and to increase blood supply around nerve endings.

 2. Pindasweda - In this technique hot cotton bags consisting of herbs, rice, and sand or medical powder are used to massage the body. This rejuvenating therapy induces perspiration in the body by which the herbs and the heat penetrates into the body. It is used to treat problems of the joints such as gout, arthritis, and sciatica.

 3. Upanaha - A combination of herbal medicine is applied to the affected part and then covered with medicinal leaves. The herbs help in easing the muscles and tendons of the affected part. It relieves pain, reduces swellings and improves mobility in the joint.

 4. Kati vista - In this treatment, medicated oil is pooled into a collar made from dough and then placed on the lower back for a specific amount of time. It strengthens the lower back, lubricates the spine and acts as a muscle pain reliever.

Soothe Your Joint and Spine Pain with Ayurvedic Panchakarma

Vertebroplasty means shaping the backbone i.e. vertebra for backbone and plasty is related to shape. This is an outpatient procedure done to treat compression fractures of the spinal cord. The backbone is made up of multiple small bones which are stacked one on top of the other with a filling material in between that is known as vertebrae. The stack of bones are held in place by the soft, elastic vertebral material. 

Vertebroplasty & similar procedure called kyphoplasty is a non-surgical procedure where collapsed vertebrae is brought back to shape by injecting medical bone cement under fluroscopy / image intensifier in OT, thereby relieving pressure on the spinal cord or spinal nerves with special canula directed to the core of vertebral body. Indicated in osteoporotic vertebrae, spinal fracture, metastatic tumour or primary tumour of spine. This technique has replaced major surgery done earlier to reshape & fix vertabrae.

Technique: Bone cement, in a semisolid state, is injected into the weakened or fractured bone space. Once this solidifies, it provides additional support to the spine, enabling normal movement. It also helps in reducing the pain significantly and improves the overall mobility.

Procedure:

In what takes about an hour, the following steps are done. Earlier, a few decades ago, this would be an open surgical procedure. However, with advance technology, now it is done using a small incision

Local anesthesia is given in the area that needs to be operated
A biopsy needle is inserted into the fractured space with the help of an X-ray
The acrylic bone cement is injected into the bone space with a needle to fill up the space, once it solidifies, it stabilizes the vertebral space
The needle is removed and the incision is covered with a bandage
Usually the patient is sent home in an hour s time unless the overall condition is really bad
There could be some soreness at the site where injection is given, but one can notice a significant reduction in pain from the day of the procedure
There is also improvement in mobility while doing daily chores
The pain relief can last up to 3 years after the procedure
Returning back to normal activities takes about 3 to 4 days after the procedure
When to use this procedure?

Vertebroplasty is usually done in case of non-radicular pain that is intractable. In most cases, they do not respond to traditional therapies including physiotherapy, pain medications and even surgery. The pain could be due to:

Osteoporosis
Cancer metastasis
Myeloma
Spinal hemangiomas
Traumatic fractures
Benefits of using vertebroplasty for managing pain 

Minimally invasive
Effective way to get relief
Improves mobility
Cost-effective
Reduces need for long-term use of painkillers
Stabilizes the spine and prevents further collapse

Vertebroplasty - How It Can Help Manage Pain?

Why does PAIN occur? Understand the Mechanism of Pain

Pain is an unpleasant and distressing physical sensation caused by disease or injury, which induces hurt and anxiety in those suffering from it.
There are many different manifestations of pain, ranging from short term (acute pain) to long term (chronic pain). Other classifications include pain in the internal organs (visceral pain), injured tissue (inflammatory pain), nerves (neuropathic pain), etc.

The reason for the occurrence of pain depends on the cause and kind of pain being experienced. In most cases, pain acts as a warning sign that the body has been afflicted by a disorder of some sort, which may have arisen due to internal sickness or external wounding. Acute pains are generally cured on their own through rest or simple medication. Chronic pains, on the other hand, are more complicated in nature and the treatment requires more elaborate diagnosis.

The mechanism of pain

Pain is an extremely personal and subjective experience and affects each individual to varying degrees. The pain signals, which can arise in any part of the body, travel through the spinal cord to the brain along thousands of specialized nerves and nerve fibres. In the brain, it is processed in the centres associated with anxiety, emotions, memory, appetite, etc. Signals and pain inputs are then returned from the brain to the spinal cord, which may heighten or diminish pain.

In some cases, pain may also be induced by damage to the brain and spinal cord, which happens after a stroke.
A constant barrage of pain signals may cause the cells at the end of nerve fibres to become over-sensitized. This is known as 'wind-up' and is one of the most common causes of chronic pain that occurs even though the root of the problem has been identified and treated.

The causes and effects of pain differ from case to case depending on the signals received by the brain and its interpretation. It affects the individual's day to day activities and if persistent, can also have a harmful impact on mental health and psychosis. Pain is always handled, diagnosed and treated differently in all patients by drawing out the best possible solution to the problem.





Why does PAIN occur? Understand the Mechanism of Pain

Treatment of frozen shoulder varies depending on the stage it is at, and how severe is the pain and stiffness. There is no outright cure and the aim of treatment is to keep the joint as mobile as possible. The most effective treatment is that which maintains a good range of movement until the shoulder starts to heal. 

Treatment may Include the following:

1. Shoulder exercises: Regular, gentle exercise can help to keep the shoulder joint mobile. If your shoulder is very stiff, exercise may hurt, and it should only be carried out with the guidance of your doctor or physiotherapist. If you are able to, continue using your shoulder as normal saving' the shoulder can cause the muscle to waste and may make stiffness worse.
2. Painkillers: Over-the-counter painkillers such as paracetamol or prescription-only drugs such as codeine may be taken to ease pain and you should discuss this with your general physician or pharmacist.
3. Anti-inflammatory painkillers: Such as ibuprofen and diclofenac, are often prescribed to ease pain and inflammation. Any medication that you take should be discussed with your general physician or pharmacist.
4. Steroid injections into or near the shoulder joint may be effective at relieving pain and inflammation for a few weeks. However, injections are not a cure, and symptoms may return.


Treatment of frozen shoulder

Don't wait any longer, manage your Neuropathologist online with a Lybrate doctor today

Consult for Neuropathologist - Online and Easy!

FilterClear All

COMMON SPECIALITIES

COMMON ISSUES