Fractures are simply a break in a bone. They can be caused due to injury, (traumatic fractures) or a pre-existing condition like osteoporosis that causes weakening of bones (pathologic fractures). There are many ways to classify fractures. All fractures fall into the major categories of simple and compound fractures. Simple fractures are fractures where bones remain inside the skin and don t jut out. They are also called closed fractures.

Compound fractures, also called open fractures, are broken bones that penetrate through the skin. These types expose the bone and deep tissues to the environment. Compound fractures are more serious of the two. The healing here may be affected due to deep infections for which antibiotics need to be used. There are many different sub types of fractures and we re only going to skim through them here.

Comminuted fractures: Severe fractures in which a bone breaks into several smaller pieces.
Avulsion fractures: A small piece of bone is completely torn off from the main bone due to fierce pulling off a part of the body.
Other types of fractures are characterised by the many different angles the bone breaks into like transverse, oblique and spiral fractures.

Diagnosis
When a bone is broken there are symptoms like swelling that doesn t subside on its own and pain. In such a case it s imperative that one goes to a doctor for a diagnosis. Doctors can usually recognise most fractures by examining the injury and taking an X-ray. The X-ray also provides a clear idea about the type of fracture and the degree of displacement of the bone. And, it s important that the patient doesn t wait too long before approaching a doctor. This is because bones begin to heal very quickly after a fracture and the bone tissue will heal using any tissue available. This can lead to a misalignment of broken pieces of bone and cause disability and loss of function.

There are cases when X-ray may not show a fracture. This is especially common in fractures in the hip and wrist in older people. For diagnosing these, doctors will get some other tests done such as a computed tomography (CT) scan, magnetic resonance imaging (MRI), or a bone scan.

Treatments
Fractures have to be treated by doctors. The doctors set the fractured bones in their proper place and hold them there so that they can heal. Setting a bone is called "reduction." Reduction without surgery is called "closed reduction." But if the fracture is serious, it s going to require surgery with bone repositioning, called open reduction.

In extreme cases, pins, plates, screws, rods, or glue are used to hold the fractured bones in place, inside the body. Once the bone abutment has been treated, the bone is immobilised to allow the broken pieces to heal. In most cases, the fractured part is set in a rigid cast. The fractured ends of the bone can be fixed into place using metal pins connected to an external frame. This is removed after the bone has healed.

Fractures - How To Diagnose Them?

The human body allows for movement through the complex system of bones, muscles and joints. A break in the bone is medically known as a fracture and can be caused by constant stress, pressure or impact. It is common knowledge that with age, the bone strength decreases and incidence of fractures (osteoporotic fracture) increases. Based on the affected bone and impact, different types of fractures are commonly identified as:

Complete: When the breakage of the bone is complete, producing two or more pieces, it is referred to as a complete fracture.
Incomplete: When the breakage is incomplete, where the bone has cracked, but does not break into pieces, it is known as an incomplete fracture.
Another type would be the open or closed fracture:
Open fracture: When the skin is exposed and the bone breaks through this exposed skin, it is known as compound or open fracture.
Simple or closed fracture: The bone breaks, but the skin continuity is maintained. Again, here are different types including hairline, greenstick, oblique, etc.
What is the reason behind a fracture?
A bone will fracture when force is applied to it that is stronger than the bone itself. A key factor in a bone s susceptibility to fracturing is age. Both children and older people are prone to bone fractures. Children s bones are constantly growing and have not reached their full strength. Elderly people have brittle bones with old age and are prone to develop bone diseases, making them susceptible to fractures.

How they are treated?
Splint and pain medications are commonly used. Closed reduction where the fracture is reduced without opening up the tissues and open reduction, where the tissues are opened up are common approaches to managing fractures.

Can they be prevented?
Especially with children and in the elderly, extra precaution should be taken to avoid any kind of injury and fracture.

Develop an exercise routine to strengthen the muscles
Manage weight
Use the right footwear and exercise gear
Watch your medications (avoid sleep inducing ones)
Increase lighting in the room/home to improve clarity of vision for elderly
Make the home/living area fall-proof by reducing clutter, using railing in the bathroom and bedroom, using rubber mat, etc.
While a fall may seem inevitable, taking the above steps can help reduce the incidence and severity of a fall, thereby minimizing damage.

Bone Fracture - Common Types and How They Can be Prevented?


A fracture separates a single solid object into two or more pieces due to pressure. In medical terms, a fracture refers to a broken bone due to some kind of external trauma. A crack in the bone, on the other hand, it does not cause a clean break in the bone, there is only a separation or discontinuity in the bone material.

A crack in the bone caused due to repeated stress is often called as 'hairline fracture'. Here are the basic differences between a crack and a fracture in the bone and how to treat them:

1. A crack or hairline fracture is rarely caused by a single injury. It is usually the result of bone fatigue, which may be caused due to repeated, concentrated stress over a long period of time and thus, it is also called as 'stress fracture'. Other bone fractures are almost always the result of sudden and severe force on the bones.

2. The skeletal system constantly remodels itself. The cells, known as 'osteoblasts' absorb calcium and secrete bone connective tissue. If a particular site is exposed to recurrent bouts of force (which are individually not impactful enough to cause a crack), over time the osteoblasts in that region malfunction and the crack appears.

Muscular exhaustion can also cause cracks in the bone. Fractures are caused due to sudden external single force trauma to the bone. Nutritional problems like deficiencies of Calcium, Phosphorus, vitamin D and excessive smoking decrease the bone mineral density and increase the chance of both cracks and fractures.

3. Symptoms of a crack are swelling, tenderness and sharp pain in the injured region and the symptoms worsen over time. A fracture has similar symptoms and might also exhibit an external physical distortion and makes it impossible to move that part of the body that where the bone is broken.

4. An MRI is often suggested for detecting the crack or crack-prone areas because an X-ray can only detect the crack after it widens somewhat or the bone starts paining because the rays cannot pass through the tiny gap in bone material. A fracture is easily detectable by an X-ray because the rays pass right through the break.

5. Complete rest for six to eight weeks is the most effective way of healing a crack. Using a walking boot in case of cracks in the leg bones in also helpful. Healing fractures require extensive medical intervention. Surgical techniques like bone grafting and the insertion of metal plates are used to reposition the broken bone.

Cracks VS Fractures

Spinal fractures occur as a result of an injury or dislocation of the bony vertebra. This causes the bone fragments to pinch and damage the spinal cord. Fractures can occur anywhere along the spine but the most common site of fracture is the lower back.

What causes spinal fractures?

Spinal fractures are often a result of the following-

  A sudden traumatic injury
  A high-velocity accident
  Falling from a height
  Sports injuries
  Spinal instability
  A whiplash

Types of spinal fractures:

Spinal fractures are classified into three categories, such as the following-

  Compression fracture - If you exert excessive pressure on the vertebra, it will break. This type of fracture occurs when the bones in the spine become fragile or weak to the extent that they easily crumble. People living with osteoporosis, certain types of cancer or tumours are prone to a compression fracture.

  Dislocation - When the discs and/or ligaments linking the vertebrae is torn or stretched, the bones may dislocate or come out of alignment.

  Fracture-dislocation - Torn ligament and broken bone lead to this condition. A fracture-dislocation is a debilitating condition and often requires surgical intervention.

Symptoms of spine fractures:

Following an accident or an injury, you can tell if you have ended up fracturing your spinal column by identifying these symptoms-

  Excruciating pain
  Tingling sensation
  Numbness
  Muscle spasm
  Swelling of the muscle
  Sudden onset of back pain
  Restricted spinal mobility
  The pain worsens if you walk or stand for long
  Deformity or disability of the spine

How are spinal fractures treated?

Spinal fracture treatment begins with administering pain-management drugs and medications to ease the symptoms, and stabilization methods to prevent injury. Depending on the nature of the fracture, your doctor may follow these lines of treatment-

  Fusion and instrumentation - These are surgical procedures to cure unstable fractures. Fusion refers to the joining of the vertebrae using a bone graft along with hardware such as hooks, rods, plates, or pedicle screws. The bone graft joins the vertebrae below and above to form a solid piece of bone.

  Kyphoplasty and vertebroplasty - These are minimally invasive procedures, wherein the surgeon injects bone cement into the fractured body through a needle. During kyphoplasty, the surgeon first inserts and inflates a balloon to expand the compressed vertebrae and then fills it with bone cement.

Spinal fractures are an extremely uncomfortable and painful condition to live with. It can hinder your day-to-day activities and affect your quality of life. It is imperative that you seek immediate treatment if you end up with fractures or dislocation of the spine.

Spine Fracture - How Can You Get It Fixed?

When you experience any kind of bone and joint pain, you may be wondering what the best remedy might be to get relief. Some people ignore the pain, and it worsens, while others take over-the-counter medicines. However, the best remedy for bone and joint pain is to visit a pain management specialist. The field of pain management has evolved over the last twenty years. Nowadays, there are dedicated pain management specialists who are experts in treating bone and joint pain.

Here are 3 reasons to consult a pain management specialist for bone and joint pain:
1. Pain management specialists are trained especially for understanding any kind of bone or joint pain. They undergo special training based on bone and joint pain management and thus know how best to recognize and treat such pains.

2. Pain management specialists have a multidisciplinary approach towards treating bone and joint pain. The aim of pain management is to provide overall treatment and pain management specialists know about the best ways to take care of joint and bone pains. Pain management involves interventional procedures, psychological therapies, medication management and physical therapies. Pain management specialists also provide you with lifestyle modification remedies and assign you exercise schedules and diet plans. Alternative medicines like acupuncture and massage therapies are also provided by pain management specialists.

3. Pain management specialists cooperate with you and come up with the best solution for your bone and joint pain. Pain is such an aspect, which has no fixed cure and the remedy varies from person to person and depends on the nature and severity of the pain. Thus everyone should receive a personalized treatment, which is most suitable to cure the pain that has occurred to them. Pain management specialists work with patients, discuss a lot and come up with the best treatment procedure, which would complement the patient. For example, a neurostimulation device can be prescribed to a patient who suffers from complex regional pain syndrome and did not have success with other treatment procedures. In many patients with a shattered spinal disc, pain management specialists prescribe injections, which work effectively to give relief and treat the condition.

A pain management specialist can make the best assessments on bone and joint pain. Being trained especially in bone and joint pain management, you can bank upon pain management specialists to receive the best treatment for your bone or joint pain.

3 Reasons to See a Pain Management Specialist for Bone and Joint Pain

Breaking a bone is, needless to say, a painful experience. But, when people have their broken bone put in a cast, they tend to forget about it until it comes out. This is quite wrong! A person would want to be up and running but does not find that the hand or the leg as it has been cast up. For weeks, the person's hand or leg barely moves and also shrinks up quite a lot!

There is a lot of pain, not only due to shrinkage when a fracture occurs. The occurrence itself causes what is known as acute pain. Then, for some weeks, the sub-acute pain just seems to persist, to the person having the fracture. The reason for this is the fact that the bone and the soft tissue are in the process of healing.

Chronic pain is a worry as it does not go away even after the healing process has ended. In order to make sure that there is a quick recovery and there is no chronic pain which is experienced at all, some of the proverbial leaves need to be taken out of the book of physiotherapy.

To start with, sometime between a fortnight and a month after the injury or the bone break has taken place, the doctor will wish to see some movement in the soft tissue that has broken around the bone. The great advantage of this is that while it may be a little bit of effort and time involved, there are great benefits by the way of less pain and swelling as the blood flows as normally as is possible.

If such movements are not done, a person can have related soreness, which can be even more of a pain! An example of this would be a broken foot or ankle causing the stiffness of the knee. When a person is already in pain, adding to his or her trouble makes no sense at all, does it?

Post one month mark, the physiotherapist would want to see more functioning so that the normal levels can be attained. A person who has a fracture should not despair as if he or she is willing to stick to the schedule given by the physiotherapist and perform all the exercises that have been set out, he or she will be back at the normal level much sooner than would have been expected!

Also, getting active again will reduce the risk of a repeat injury, and that is enough justification to do so!

What To Expect When Recovering From Broken Bones?

Don't wait any longer, manage your Fracture Treatment online with a Lybrate doctor today

Consult for Fracture Treatment - Online and Easy!

FilterClear All

COMMON SPECIALITIES

COMMON ISSUES